DISCHARGE WHITE PRINTING

DISCHARGE 161-W

PVC-Free discharge ink free of heavy metals, APEOS, organotin compound. Can be achieved off-white, white and bright pastel shades with soft hand feel on good dischargeable fabrics.

DESCRIPTION

Discharge soft touch JM 161W is versatile product. It can be printed straight from the bucket with or without activator base on customer fabric quality & print requirement, print this as under base, over print with mixing JM-161W & discharge clear add required pigment concentrate. Cure at 160° -170° for 120 to 150 seconds.

APPLICATION

Mix soft touch JM -161 W with 4 to 6 % DC agent (Discharge Activator). Mix it properly to get good white discharge print. This mixed paste can we used as under base white on dischargeable fabric and over print with 4 colours. CMYK print to get bright print with excellent soft hand feel. Pot life of discharge with activator is 6 to 8 of hours, print fabric cure at 160° -170° for 120 to 150 seconds.

PRINTING TECHNIQUE

  • Cover image area with ink

  • Use minimum squeegee pressure to transfer ink.

  • Use medium hard squeegee (60-65 hardness)

  • Print through 120 to 180 mc in (48 to 72 mc cm )

DISCLAIMER

All recommendation & statments made, if any, are based on Creative research & experience. However, since we has no control over the conditions of use storage of the product sold, Creative cannot guarantee the results obtained through the use of its products. All products are sold and samples given without any representation or warranty, expressed or implied, of tness for any particular purpose or otherwise, & upon condition that the buyer shall determine the suitability of the product for its own purpose. This applies also where protective rights of third parties are involved. It does not release the user from the obligation to test suitability of the product for the intended purpose and application.